BFSRY - VARGLAS SILICONE RUBBER ES-4400

  • MSDS: BFSRY
  • Manufacturer: VARFLEX CORP
  • Product Name: VARGLAS SILICONE RUBBER ES-4400
  • National Stock Number: 5970-00-852-2653
Product Identification

Product ID:VARGLAS SILICONE RUBBER ES-4400
MSDS Date:04/27/1989
FSC:5970
NIIN:00-852-2653
MSDS Number: BFSRY

Responsible Party
VARFLEX CORPORATION
512 WEST COURT STREET
ROME, NY 13440
US

Emergency Phone: 315-337-2642

Info Phone: 315-336-4400

Cage: 79074

Contractor
VARFLEX CORPORATION
ROME, NY 13440 US

Telephone: 315-336-4400

Cage: 79074

Ingredients

FIBERGLASS

OSHA PEL 15 MG/M3(TOTAL DUST)

ACGIH TLV: 10 MG/M3 (DUST)


SILICONE RUBBER-VINYL,METHYL,AND PHENYL

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYES/SKIN:IRRITATION.
INGESTION:UNLIKELY TO OCCUR. CHRONIC:NO HEALTH HAZARD PER
MANUFACTURER.
Effects of Overexposure:IRRITATION TO EYES AND SKIN.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH SKIN DISEASES MAY
BE MORE ADVERSELY AFFECTED.

First Aid

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SKIN:WASH WITH
SOAP AND WATER.

Fire Fighting

Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.

Handling

Handling and Storage Precautions:NO SPECIAL REQUIREMENT.
Other Precautions:NONE.

Exposure Controls

Respiratory Protection:DUST MASK IF CUTTING.
Ventilation:GENERAL VENTIL.IF CUTTING.
Protective Gloves:NONE NORMALLY NEEDED.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE.

Chemical Properties

HCC:N1
Spec Gravity:2.25
Solubility in Water:INSOLUBLE
Appearance and Odor:CONTINUOUS FILM OF SILICONE RUBBER ON "FIBERGLAS"
BRAID. NO ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:AVOID TEMPERATURES ABOVE 482F (250C).
Hazardous Decomposition Products:METHYL AND PHENYL BY-PRODUCTS.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
FEDERAL,STATE AND LOCAL REGULATIONS. BURNING IS NOT RECOMMENDED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.